Sankyo Automation
Feel free to contact us. [937.498.4901]
Email us


Sankyo News

Overview
Features
Typical Applications
Specifications
Downloads
Related Products
P Series
Overview
P Series
The P Series uses a parallel cam mechanism with parallel input and output shafts. Because it is easy to produce drives with any arbitrary small number of stops (e.g. 1, 2, or 3), the P Series is suitable for conveyors with long feed pitches.


 

Features

Parallel Shaft Type
Unlike other SANDEX indexers, the input and output shafts on a P Series indexer are parallel.
Wide Product Lineup
Available in many sizes and indexing configurations.
Suitable for a Small Number of Stops.
Units can be made from one indexing stop.
Flexible Mounting Positions
Index mounts in any position with gearmotor mounting on either side of the index.
Typical Applications

Specifications
P Series Specifications
Description Symbol Unit P40/E40 P50/E50 P65/E65 P80/E80 P100/E100 P125/E125
P - Indexing Stops s   1, 2, 3, 4, 6, 8
E - Oscillating Angle φ deg 15, 30, 45
Indexes per Minute   ipm 0 to 300
Standard Cam Curve     Modified Sine (MS), Modified Constant Velocity (MCV)
Output Allowable Thrust Load P1 N 637 1274 2450 3528 4704 5096
Output Allowable Radial Load P2 N 490 980 1568 2450 3920 6174
Output Static Torque Ts N·m Refer to Torque Transfer Table
Output Torsional Rigidity K1 N·m/rad 2.0×103 4.3×103 9.0×103 1.81×104 3.19×104 4.93×104
Output Moment of Inertia J0 kg·m2 Refer to Torque Transfer Table
Input Allowable Thrust Load P4 N 637 1274 2450 3528 4704 5096
Input Max Repetitious Bending Force P5 N 490 980 1568 2450 3920 6174
Input Max Repetitious Allowable Torque P6 N·m 29.4 58.8 107.8 245 392 637
Input Torsional Rigidity K2 N·m/rad 2.0×103 4.3×103 9.0×103 1.81×104 3.19×104 4.93×104
Input Moment of Inertia (Note 1) J1 kg·m2 1.5×10-4 2.75×10-4 8.25×10-4 2.45×10-3 6.0×10-3 1.63×10-2
Indexing Accuracy (1 Dwell)
(1, 2, 3, 4 stops)
  sec ±90 ±72 ±60 ±60 ±60 ±60
Indexing Accuracy (2 Dwell)
(6, 8 stops)
  sec ±180 ±144 ±120 ±120 ±120 ±120
Repeatability   sec 90 72 60 60 60 60
Product Weight   kg Approx. 3.5 Approx. 7.5 Approx. 14 Approx. 20 Approx. 36 Approx. 65
Housing Color     Hammer net gray
Lubrication     Grease lubrication Grease lubrication Oil lubrication Oil lubrication Oil lubrication Oil lubrication
Output Configuration     Shaft Shaft Shaft Shaft Shaft Shaft
Note 1) Input moment of inertia: J is calculated in dwell.
Description Symbol Unit P150/E150 P175/E175 P200/E200 P250/E250 P320/E320 P400/E400
P - Indexing Stops s   1, 2, 3, 4, 6, 8
E - Oscillating Angle φ deg 15, 30, 45
Indexes per Minute   ipm 0 to 300
Standard Cam Curve     Modified Sine (MS), Modified Constant Velocity (MCV)
Output Allowable Thrust Load P1 N 7350 9016 12936 15190 22540 26460
Output Allowable Radial Load P2 N 8428 9800 13524 15288 23520 39200
Output Static Torque Ts N·m Refer to Torque Transfer Table
Output Torsional Rigidity K1 N·m/rad 1.76×105 1.65×105 3.19×105 5.26×105 1.08×106 1.46×106
Output Moment of Inertia J0 kg·m2 Refer to Torque Transfer Table
Input Allowable Thrust Load P4 N 7350 9016 12936 15190 22540 26460
Input Max Repetitious Bending Force P5 N 8624 9800 18620 23520 41160 54880
Input Max Repetitious Allowable Torque P6 N·m 1323 1813 3136 4900 10780 14700
Input Torsional Rigidity K2 N·m/rad 1.76×105 1.65×105 3.19×105 5.26×105 1.08×106 1.46×106
Input Moment of Inertia (Note 1) J1 kg·m2 4.0×10-2 7.5×10-2 0.148 0.495 1.7 4.43
Indexing Accuracy (1 Dwell)
(1, 2, 3, 4 stops)
  sec ±60 ±60 ±60 ±60 ±60 ±60
Indexing Accuracy (2 Dwell)
(6, 8 stops)
  sec ±120 ±120 ±120 ±120 ±120 ±120
Repeatability   sec 60 60 60 60 60 60
Product Weight   kg Approx. 100 Approx. 160 Approx. 220 Approx. 350 Approx. 750 Approx. 1400
Housing Color     Hammer net gray
Lubrication     Oil lubrication Oil lubrication Oil lubrication Oil lubrication Oil lubrication Oil lubrication
Output Configuration     Shaft Shaft Shaft Shaft Shaft Shaft
Note 1) Input moment of inertia: J is calculated in dwell.
Options for the P Series
Item Model P40/E40 P50/E50 P65/E65 P80/E80 P100/E100 P125/E125
Mounted Reducer R type Special R48 R48 R48, R65 R65, R80 R80
Mounted Cam Balancer B type Special Special Special Special Special Special
Mounted TorqueLimiter TF and TC types 4, 5 6 6 6, 7 7, 8 7, 8
Mounted Torque Limit Overload Sensor     Available Available Available Available Available Available
Mounted Motor     Special Special Special Special Special Special
Mounted Timing Cam     Special Special Special Special Special Special
Different Oil Fill/Drain Position     Available Available Available Available
Knock Pin Holes in Housing     Available Available Available Available Available Available
Different Input/Output Shaft Configuration     Available Available Available Available Available Available
Special: Contact for further details.
Item Model P150/E150 P175/E175 P200/E200 P250/E250 P320/E320 P400/E400
Mounted Reducer R type R80, R100 R100 R100, R125 R125, R160 R160 R48, R65
Mounted Cam Balancer B type Special Special Special Special Special Special
Mounted TorqueLimiter TF and TC types 8, 11 11, 14 11, 14 14, 18 18 6, 7
Mounted Torque Limit Overload Sensor     Available Available Available Available Available Available
Mounted Motor     Special Special Special Special Special Special
Mounted Timing Cam     Special Special Special Special Special Special
Different Oil Fill/Drain Position     Available Available Available Available Available Available
Knock Pin Holes in Housing     Available Available Available Available Available Available
Different Input/Output Shaft Configuration     Available Available Available Available Available Available
Special: Contact for further details.
Downloads
>> Download the Rated Transfer Torque Capacity Table for rated torque values.
Product Catalogs
Outline Dimensions
2D-CAD Data
3D-CAD Data
Related Products
>> D Series
Shaft output
High speed indexing
2-48 stops
0~700 cpm
>> DF Series
Flange output
High speed specials
2-96 fixed stops
0~700 cpm
>> ED Series
Shaft or flange output
Clean room ready
2-48 fixed stops
0~300 cpm
>> AD Series
High torque capacity
Hollow output bore
2-32 fixed stops
0~200 cpm


© Copyright 2017 Sankyo Automation. All rights reserved.